How To Fit Blinds to uPVC Windows

How To Fit Blinds To uPVC Windows

You now have blinds that you want to fit on your uPVC windows and you are wondering how to go about it. You’re probably thinking that this must be a daunting task. In a way, that is true. However, it is relatively easy if you take a step-by-step approach to fitting your blinds correctly. There are several factors and tools you need to know about when you want to fit your blinds on your uPVC windows. 

Some areas where you might encounter issues include how to directly attach blinds to your windows, things you need to fit blinds to uPVC windows, how to add a blind to the frame of a uPVC window, and several others. The content below details steps on how to fit blinds on uPVC windows to make the process easier for you. We will be providing you with clear and easy steps that will help you fit your blinds on your window in little to no time. 

Before proceeding to the steps you will have to take, it is important you have the right tools to do a good job. You should get the tools together before you start fitting your blinds. 

Tools Needed

Gathering your tools ahead of time is almost as important as the materials you are installing, and will save you time in the installation process. Using substitute tools may work but it will likely complicate a rather easy process for you. 

The tools below are tools you will need to gather before you begin working on fitting blinds on your uPVC window

  • a drill along with a 3mm drill bit
  • a tape measure,
  • a spirit level 
  • a pencil or pen 
  • the screws and brackets will be included with your blinds

How to Fit Blinds to uPVC Windows: Step-by-step guide

Before proceeding to fit your blinds to your uPVC windows, you need to make sure that your window is free from any type of obstruction before commencing installation. In most cases, window handles and levers around the window can be the main cause for blinds to hang unevenly or run slowly. If you have any obstructions present around your window, you should consider moving your blind further away from your window to avoid colliding and possibly damaging your blinds. 

To proceed with fitting your blinds on your uPVC window, follow the steps in the outline below

Step 1: Bracket mounting

The first step is to mount the brackets for your window blinds. This is where your blind will hang on your uPVC window frame. Getting this right will ensure that your window blinds are sitting comfortably and you will not have to worry about it falling off at any time. The success of your blind fitting exercise rests on this first step in a way. So make sure you get it right. After successfully mounting the brackets, proceed to the next step.

Step 2: Take measurements

Marking the holes that your screws will go in is important. Taking this measurement with a pen or any recording instrument you have will give you the exact position for the holes. You can place the brackets on the position where the hole will be created to get exact positions for the screw. 

Step 3: Drill holes

After completely taking the measurements you require for the hole positions for securing the brackets for your blinds, it is now time to drill holes. On the exact area where the markings are created, you should drill holes with your mechanical drill. Make sure the holes are deep enough for your screws. After successfully drilling the holes for your screws, move on to the next step.

Step 4: Align holes

Proceed with aligning your bracket with the holes. Do this by using one bracket to align the holes you are creating with the markings. To do this, place a screw in your bracket over a hole and gently drill into the relevant hole in your frame. Make sure they are on the area of your marking. Make sure you stop drilling your screw into your window frame for your blinds before it becomes tight, keep the screws somewhat loose in this step.

Step 5: Align the other holes

After aligning and screwing in the first hole, the next thing to do is to align your bracket so the second marking is visible through the second hole. Screw lightly to confirm the alignment. When you are sure that they align perfectly, screw in your bracket until it is completely tight. Confirm that your screw is screwed in tight by trying to wriggle your bracket lightly to see if it is secured in place. 

Step 6: Secure your bracket

Make sure your bracket is attached securely to the wall area you marked out. Do this by tightening your first screw and repeating the same process for your second screw. Again, securing your bracket properly to the area you marked out on the wall will ensure the proper fitting of your blinds on your uPVC window. After repeating it for both screws, move on to the next step.

Step 7: Repeat the steps for other brackets

Now that you have successfully installed one bracket, you need to repeat all the steps above for all the remaining brackets of your blinds. Similar to what you previously did, you should ensure that you take a proper measurement, align the bracket, and secure the brackets tightly on the frame you are hanging them on. 

Step 8: Check the mechanism

After installing all the brackets for your blinds, you need to check that the mechanism for opening and closing your blinds works perfectly. Do not forget to add the design ropes and styling that accompany the blinds for your uPVC window. At this stage, your blind should be fitted to your window with no issues. 

Perfect Fit Window Blinds for your uPVC Windows

If you do not have the patience or the tools required for the step-by-step procedure above, you might want to consider a perfect fit blind for your uPVC window. This blind type already made the perfect clip and fit system for your uPVC windows. This is possible by fitting your blinds on the frame of your windows with enhancing clips. You do not need to measure or drill any wall to secure it. All you need to do is clip and fit your blinds and you are done in little or no time. 

Getting the right size for your window is likely to be the only challenge you face with perfect fit window blinds. You need to measure and get the size of the perfect fit for your uPVC windows. This compact window blind cuts out all the steps above to one or two steps by simply clipping your blinds on your window frame. These different blinds come with a heat-reflective coating that helps to keep the heat in during the winter period and repel the heat during the summer period. It is great for helping you save on your energy bill during the different seasons. 

Fitting your Window Blinds Safety Device

Now that you successfully installed your blinds on your uPVC windows, there are several things you need to consider before calling it a day. The chord that controls the open and close mechanism is a choking hazard for your kids and pets. To prevent any accident and be safe in your home, you need to secure the cord alongside the blinds. You can do this by simply fixing a cleat or hook beside your blinds. Preferably, secure this cleat or hook where the cord is completely taut. 

Summing It Up

The content above explains everything you need to know about how to fit blinds to uPVC windows. Getting the right tools and materials goes a long way in the build-up to have a seamless blind fitting exercise on your uPVC windows. Follow the step-by-step approach and recommendation above to fit your blinds safely and securely on your uPVC windows. 

Leave a Comment

Your email address will not be published. Required fields are marked *